This facility appeared owing to the releases of new official firmware which allows choosing a WAN-port for connecting to a provider. Getting ahead of ourselves we have to note that testing and studying the features of the command line resulted in finding an open FTP port. Here the part devoted to firmware change comes to its end. The only thing left to describe in this section is password management which can be performed in point 10 Passwords. In our performance tests we used 3.
|Date Added:||15 February 2004|
|File Size:||70.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If you haven’t yet changed the defaul password, we recommend that you change it first thing you do after logging in. There you choose the necessary image file and r-tg31 Upload.
RT-G31 | ASUS Global
The whole upgrade process takes around two minutes, of which the pop-up window informs. Altogether we found six open ports: You can create, look through and delete WAN-interface settings via the same-name menu point 3. Need a new router? Here the part devoted to firmware change comes to its end. The rules configured above come into effect after rebooting the router Save and Reboot. By the way, the boot loader always uses Quality Of Service 9. After moving to a new place users often have to change their provider, and this change may also mean a change in the connection technology, which will inevitably drive previously purchased network equipment out of use.
For management we chose a rather simple Getif utility the Parameter tab of which is shown below. Configuration of static and dynamic routing is made in point 5 Route Setup.
The calculation of bytes transmitted and received through ADSL is made in the second and third interfaces. Unfortunately, EZ Setup Wizard has only russian interface. Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
This facility appeared owing to the releases of new official firmware which allows choosing a WAN-port for connecting to a provider. The firmware recovery program allows loading the firmware image only to the devices in the local segment and turned into the rescue mode where the boot loader works.
In our performance tests we used 3. To upgrade via web-interface you have to open the Firmware upgrade tab in the Administration menu. Flashing root file system rg-g31 kernel Maximum length of password is 16 characters.
To check whether the device is really in the rescue mode use ping. Hit return at prompt if parameter is not used. BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Each of these memory modules is of 8 Mbyte, consequently the device can work with 16 Mbyte of RAM altogether.
Of course, we reported this to the vendor. Notify me of follow-up comments.
Asus WL-600g User Manual
From now on all unnecessary line feeds are deleted. By booting time we mean the time interval from switching power on to the arrival of the first echoing back via the ICMP protocol.
Idle timeout minutes  0: Upon successful authentication the user finds himself on the main page of the device. Naturally, we captured the dialogue between the recovery utility and DSL-G31 with the help of a network analyzer Wireshark version 1.