Turn off the projector, allow it to cool down, and unplug the power cord. Epson EX90 Specifications 2 pages. The last two inputs work with analog signals, so those who still enjoy using VCRs can project their favorite movies using the Epson EX Maintenance And Transportation You may need to clean the air filter and air vents. Connect USB cable 3.

Uploader: Zolokasa
Date Added: 16 January 2011
File Size: 10.69 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24181
Price: Free* [*Free Regsitration Required]

If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended in the following table.

Epson Projectors: Epson EX90 3 LCD projector

Setting Up the Projector jacks on the projector. Press up on the blue foot release 2.

Saving the logo takes a few moments. Allow a few seconds for the projector to sync up after pressing the button.

The price may be the seller’s own price elsewhere or another seller’s price. Changing Menu Settings Changing Menu Settings Use the buttons on the remote eex90 or on the projector to access the menus and change settings. You can select from the following settings, and save a different one for each computer Transporting the Projector The projector contains many glass and precision parts.

Update Unrecognized Zip Code. Bottom Bottom Holes for attaching ceiling mount bracket Control Panel Lights indicate projector status Welcome Security lock slot Up and Down buttons correct dpson distortion button epsob select menu items Enter button automatically adjusts computer image Air filter Hole for attaching If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance.


To receive an S-Video signal, you need an S-Video cable.

It also lets you reset the lamp hours to their initial The Computer Input, Lamp fpson value; see page 78 for instructions on resetting the lamp timer. Request part number V13HL Using the Remote Control Always use the original packaging or equivalent when you need to send the projector to another location.

Page 56 You can also select High brightness mode in the Settings menu. PUSH covered, and the top of the cover should be flush with the top of the projector.

Epson EX90 LCD Projector

Focus You can also change the image size by moving the projector closer to or farther away from the screen. Be the first to write a review.

The last two inputs work with analog signals, so those who still enjoy using VCRs can project their favorite movies using the Epson EX Turning On Your Equipment If you turn on your connected computer or video equipment before starting the projector, the projector automatically detects and epsn the image source.


To change slides with the remote control, make sure you have connected your computer to the projector with a USB cable as described on page Projector control panel No Signal Make sure the lens is not fogged by condensation. Solving Password Problems You have forgotten the password. See Chapter 3 for instructions on using the remote. Stand behind the projector. Page 88 See your software documentation for specific information.


The projector may not respond to remote control commands under the following conditions: These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Page 57 cooler tones. Settings Fine-tuning the Projector Blackboard Choose this fixed color mode when you need to project against a green chalkboard. Press to select the Image menu. Wait until the light stops flashing but stays orange.