Front view of the LTO 3 tape drive. The server is powered on. The host bus adapter HBA and its device driver were installed automatically. Tape drive, SCSI bus or fibre channel error. This section lists error codes that can appear on the single-character display SCD of the LTO tape drives and describes each error. From the Select from System Storage menu, select Tape systems. An easier way to obtain information about a drive error is to determine which drive is reporting an error, then access the error log for that drive by using the operator panel or by using the Tape Library Specialist web interface.
|Date Added:||7 May 2007|
|File Size:||38.61 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
IBM Ultrium Tape Drive Firmware – United States
Tape drive hardware problem. The IBM tape device driver has two installers: Tape drive detected that the Drive Power Supply is approaching the specified voltage limit drive is still operating or is outside the specified voltage range drive is not operating.
The tape drive is powered on. From the Select from Tape drivers and software menu, select Tape device drivers. LED indicator for drive status. Use this table only if no sense data is available.
Resolving errors with the LTO tape drives
Tape drive or media error. Tape drive or RS error. A Tape drive hardware problem. Microcode or tape scs problem. The rear panel of LTO 5 and later tape drives has a power beacon LED that indicates the drive is powered on when green.
Platform Independent Software edition: B No error or message is assigned. The Unload button on the drive ulrtium-hh3 pushed in and did not release. There are a few pull down menus to navigate to the correct download as follows:.
From the Product Scsk menu, select System Storage. The host bus adapter HBA and its device driver were installed automatically. Download Description In order to provide maximum performance and reliability, it is recommended that the latest version of microcode is installed on your IBM LTO tape devices.
Not Applicable Operating system s: Click the Select product option. For details on supported tape attachment please refer to the System Storage Interoperation Center website.
Tape drive, SCSI bus or fibre channel error.
Click the Find product option. There are a few pull down menus to navigate to the correct download as follows: Click Continue to go to the Select fixes page. You can access a drive error log from the operator panel by using the Service and Drive Error Logs menus. From the Select from Tape systems menu, select Tape drivers and software. Occasionally this LED can be blue, which does not indicate an error.
United States English English.
Downloading the IBM Tape Diagnostic Tool
For the most recent tape drive for Windows, see Required software. In the Product selector field, type in Tape device drivers. See the Ultrijm-hh3, Operator ultruum-hh3 Service Guide for the Ultrium tape product for detailed installation instructions. Use one of the following procedures, Find product or Select product, to access the IBM Fix Central portal and download the most recent version of the tape device driver. C Tape drive needs to be cleaned.
D No error or message is assigned.